Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing Continuing Education questions. View questions in All Grades.

Continuing Education

Browse Questions

Continuing Education Interior Finishing Questions

You can create printable tests and worksheets from these Continuing Education Interior Finishing questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 3 of 4 Next
Continuing Education Types of Wall and Ceiling Finishes
Prior to beginning the installation of the main tees, what must be calculated?
  1. The width of the border tiles
  2. Width of the ceiling tiles
  3. Amount of hanger wire required
  4. Just start installing
Continuing Education Gypsum and Wallboard
When installing gypsum board in commercial applications, what is often specified to increase the fire and sound resistance of the gypsum wall?
  1. Use adhesive between studs and gypsum
  2. Extra screws
  3. Double layer of drywall
  4. Use thicker drywall mud
Continuing Education Types of Wall and Ceiling Finishes
In what areas would it make the most sense to install tile instead of wood?
  1. Bathrooms
  2. Living rooms
  3. Bedrooms
  4. Dining rooms
Continuing Education Types of Wall and Ceiling Finishes
When installing interior wall paneling made of wood, the moisture content of the material should match what?
  1. The moisture content of the interior of the house
  2. The moisture content of the bathroom
  3. The average moisture content of the area it is used
  4. It does not matter
Continuing Education Architectural Features and Trim
When installing door casings, the door jamb and wall finish may not be exactly flush. What is done with factory manufactured casings that allows the casing to tight on both the jamb and wall finish?
  1. They can not be used
  2. The door jamb needs to be reinstalled
  3. Casings are backed out, notched on the backside
  4. Additional nails and screws are used in the casing to make it flush
Continuing Education Gypsum and Wallboard
What is the recommended distance your first fastener should be placed from the tapered edge of the drywall?
  1. No less that 3/8"
  2. No less than 1/2"
  3. No more than 1 1/2"
  4. No more than 2"
Continuing Education Types of Wall and Ceiling Finishes
Gypsum wallboard generally comes in lengths at what interval?
  1. 2'
  2. 3'
  3. 5'
  4. None of the above
Continuing Education Gypsum and Wallboard
What tool is used to shape and smooth the cut rough edge on a piece of gypsum board?
  1. Rasp
  2. File
  3. Grinder
  4. Knife
Continuing Education Gypsum and Wallboard
When scoring a piece of gypsum board, what may happen if you cut to deeply into the gypsum?
  1. Creates a ragged cut
  2. Creates a clean cut
  3. Does not snap properly
  4. Creates inaccurate cuts
Continuing Education Gypsum and Wallboard
At what time during the construction process should the gypsum wall board be delivered to the site?
  1. Right before it is needed
  2. As early as possible
  3. It does not matter
  4. As soon as framing is complete
Continuing Education Gypsum and Wallboard
What is the name of the piece of equipment that can hold a piece of drywall in place for a ceiling installation while it is fastened?
  1. Foot lifter
  2. Scissor lift
  3. Wall lifter
  4. Drywall jack
Continuing Education Types of Wall and Ceiling Finishes
Interior wall paneling can be made of what material?
  1. Wood
  2. Composites
  3. Aluminum
  4. All of the above
Previous Page 3 of 4 Next