Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

Continuing Education

Browse Questions

Concrete Forming and Placing Questions - All Grades

You can create printable tests and worksheets from these Concrete Forming and Placing questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 5 Next
Continuing Education Concrete Forming Systems and Techniques
When pouring a concrete slab on grade at the same time as the footing, it is referred to as a                 slab.
  1. Single
  2. Monolithic
  3. Full
  4. One time
Continuing Education Concrete Forming and Placing Tools
A screed board needs to be made out of magnesium or aluminum for it to work correctly.
  1. True
  2. False
Continuing Education Concrete Forming and Placing Tools
Once concrete is poured it is impossible to change the final finish of it.
  1. True
  2. False
None Concrete Forming Systems and Techniques
Footings of a foundation wall are considered flatwork. How wide are the footings in comparison to the foundation wall?
  1. twice the wall thickness
  2. same as the wall thickness
  3. three times the wall thickness
  4. does not matter how thick they are
Continuing Education Concrete Forming Systems and Techniques
When constructing a slab on grade, what is placed below the slab to ensure there is adequate support and drainage?
  1. Rocks
  2. Gravel
  3. Asphalt
  4. Top soil
Continuing Education Concrete Stairs
Why type of nails are generally used for framing concrete stairs that make it easier to strip?
  1. Common nails
  2. Roofing nails
  3. Duplex nails
  4. Galvanized nails
Continuing Education Concrete Forming and Placing Tools
What tool is used to create a textured finish on a concrete slab?
  1. Texturizer
  2. Power float
  3. Broom
  4. Rake
None Concrete Forming Systems and Techniques
What is it called when a footing is poured directly into the soil with no footing?
  1. Free pour
  2. Rough pour
  3. Trench pour
  4. Easy pour
None Concrete Forming Systems and Techniques
What makes forming a set of suspended stairs more difficult?
  1. No additional support is needed
  2. A form needs to be built on the underside of the stairs
  3. You need to use large lumber
  4. The plywood needs to be thicker
Continuing Education Concrete Forming and Placing Tools
What tool is used to ensure the concrete adequately flows around rebar and all excess air is removed?
  1. Trowel
  2. Vibrator
  3. Tamper
  4. Screed board
None Concrete Forming Systems and Techniques
What are driven into the ground and used to hold flat work forms and footings in place?
  1. nails
  2. level
  3. metal
  4. stakes
None Concrete Placement
What would you need to add if you were required to build a suspended set of concrete stairs instead of earth supported?
  1. Additional rebar
  2. Additional concrete
  3. Additional large rocks
  4. Additonal water to the mix
Continuing Education Concrete Forming and Placing Tools
What are used to allow the concrete finisher to walk on concrete for final troweling work?
  1. Screed boards
  2. Kneeling boards
  3. Bull floats
  4. Knee floats
Continuing Education Concrete Forming and Placing Tools
If a tool is being used for placing fresh concrete when must it be cleaned?
  1. Before the concrete is poured
  2. Right after the concrete is poured
  3. Once the tool is finished being used
  4. Does not need to be cleaned
Previous Page 1 of 5 Next