Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Grade 9 Grade 11 Continuing Education

Browse Questions

None Power Tools Questions

You can create printable tests and worksheets from these None Power Tools questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 2 Next
None Power Tools
What safety feature can be found on most types of power saws?
  1. Adjustment plate
  2. Baseplate
  3. Guard
  4. Ground fault circuit interuptor
None Power Tools
When you need to do a plunge cut with a circular saw, what needs to be done to one of the safety devices on the tools?
  1. Press the safety on trigger
  2. Wear safety glasses
  3. Ensure the GFCI is connected
  4. Pull the guard back
None Power Tools
When using a table saw or jointer it is recommended to use a push stick for what reason?
  1. To add additional pressure to the material
  2. Avoid having your fingers near the blade
  3. It is the only way the tool works
  4. Prevents kickback
None Power Tools
Identify the tool in the image.
Carpentry Tools - Circular Saw
  1. Hand saw
  2. Chop saw
  3. Skill saw
  4. Circular saw
None Power Tools
Identify the tool in the image.
Carpentry Tools - Cordless Drill
  1. Cordless drill
  2. Hand drill
  3. Power drill
  4. Impact drill
None Power Tools
Identify the tool in the image.
Carpentry Tools - Jigsaw
  1. Jig saw
  2. Reciprocating saw
  3. Circular saw
  4. Plunge saw
None Power Tools
Electric compressors should be plugged directly into the power source whenever possible because
  1. they have small cords.
  2. are loud and should be as far away from workers as possible.
  3. are very heavy and difficult to lift into place.
  4. they require a lot of power.
None Power Tools
Identify the tool in the image.
Carpentry Tools - Angle Grinder
  1. Grinder
  2. Cut off saw
  3. Hand grinder
  4. Rotating saw
None Power Tools
What type of saw has a straight up and down cutting action?
  1. Coping Saw
  2. Jig saw
  3. Recipricating Saw
  4. Skill saw
None Power Tools
Identify the tool in the image.
Carpentry Tools - Hammer Drill
  1. Power drill
  2. Hammer drill
  3. Masonry drill
  4. Lock drill
None Power Tools
Identify the tool in the image.
Carpentry Tools - SDS Drill
  1. Power drill
  2. Hammer drill
  3. Hand drill
  4. Impact drill
None Power Tools
What is the standard operating pressure of pneumatic tools?
  1. 60-120 PSI
  2. 40-110 PSI
  3. 30-100 PSI
  4. 20-90 PSI
None Power Tools
Identify the tool in the image.
Carpentry Tools - Auger Bit
  1. Auger drill bit
  2. Drill bit
  3. Spade drill bit
  4. Twist drill bit
None Power Tools
When cutting the inside of an opening with a router what is the correct direction of travel?
  1. Does not matter
  2. Counter clockwise
  3. Clockwise
  4. Depends on the bit selection
None Power Tools
When cutting an angle on a long rafter what saw is generally used by house framers?
  1. Circular saw
  2. Band saw
  3. Cross cut saw
  4. Table saw
Previous Page 1 of 2 Next