Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Grade 9 Grade 10 Grade 11 Grade 12 College Continuing Education

Browse Questions

None Carpentry Questions

You can create printable tests and worksheets from these None Carpentry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 3 of 39 Next
None Power Tools
When you need to do a plunge cut with a circular saw, what needs to be done to one of the safety devices on the tools?
  1. Press the safety on trigger
  2. Wear safety glasses
  3. Ensure the GFCI is connected
  4. Pull the guard back
None Screws, Nails, and Fasteners
What is an anchor?
  1. The insulation in the wall
  2. The roof being held down solid to the house
  3. A type of fastener to attach components to walls or ceilings
  4. A special kind of footing
None Tool Safety
What is one way a user can be injured when using a hand tool?
  1. Electric shock
  2. Improper use
  3. Can't be injured
  4. Wearing gloves
None Power Tools
When using a table saw or jointer it is recommended to use a push stick for what reason?
  1. To add additional pressure to the material
  2. Avoid having your fingers near the blade
  3. It is the only way the tool works
  4. Prevents kickback
None Screws, Nails, and Fasteners
What is the best type of adhesive to use when a moisture and uv resistant is required?
  1. Construction adhesive
  2. Urethane glue
  3. Regular wood glue
  4. Contact cement
None Concrete Forming Systems and Techniques
Footings of a foundation wall are considered flatwork. How wide are the footings in comparison to the foundation wall?
  1. twice the wall thickness
  2. same as the wall thickness
  3. three times the wall thickness
  4. does not matter how thick they are
None Power Tools
Identify the tool in the image.
Carpentry Tools - Circular Saw
  1. Hand saw
  2. Chop saw
  3. Skill saw
  4. Circular saw
None Hand Tools
Which of the tools below is best suited to cut the hinge gain in a door frame?
  1. Wood chisel
  2. Hammer
  3. Nail bar
  4. Block plane
None Framing Techniques
What is the most common type of framing method used in residential wood frame buildings?
  1. Balloon Framing
  2. Platform Framing
  3. Rigid Framing
  4. Post and Beam
None Building Materials
Both plywood and LVL's are made up of multiple layers or veneers of wood. What is one of the main differences in the manufacture process of plywood vs LVL?
  1. Plywood layers grain are run opposite, LVL layers grain are run parallel
  2. Plywood layers use less glue than LVL layers
  3. LVL glue is rated for exterior use, and plywood glue is not
  4. Plywood is made for wood frame construction, LVL's are not
None Blueprints and Blueprint Reading
When ordering materials for a hand cut roof constructed of rafters and a ridge beam, where would you find the requirements for which size of dimensional lumber to use?
  1. Building by law
  2. Structural Engineer drawings
  3. Architectural drawings
  4. Cross section
Previous Page 3 of 39 Next